Daily walkaround checks: paper vs app, and what the RSA requires

The daily walkaround check is a legal duty. Before a commercial vehicle goes out, someone has to look it over and record that they did. Many Irish fleets still record it in a paper book that lives in the cab, gets rained on, and is hard to produce when the RSA asks for it. This guide sets out what the RSA requires, where paper records fall short, and how a walkaround app handles each requirement.

What the RSA requires for walkaround checks

Under S.I. 348/2013, the operator must ensure a daily walkaround check is carried out before the vehicle is first used and no more than once in any 24-hour period. It must be done by a trained, competent person (the driver or a mechanic), and it has to cover the vehicle inside and out, working through the Schedule 1 items, including the tachograph.

If a defect is found, the record of it must contain a description of the defect, the time and date it was found, and any temporary measures taken. Where a defect is dangerous, the vehicle cannot be used until it has been repaired and certified as repaired. The records must also be kept. Maintenance and defect records must be retained for at least two years under S.I. 348/2013.

All of this is mandatory. For compliance purposes, a walkaround that isn’t recorded, or a record you can’t retrieve, counts as a walkaround that didn’t happen.

Where paper defect books fall short

Paper defect books tend to fail in the same ways.

  • A date written in a box doesn’t prove when a check was done.
  • Without photographs, a defect report is only as good as one person’s handwriting.
  • Defects go into a book the workshop doesn’t see until it’s too late.
  • Books get lost, soaked, or left in the cab of a vehicle that’s now on the other side of the country.
  • When you need two years of records for a specific vehicle on a specific date, you’re flicking through a drawer of duplicate pads.

The check gets done, but the evidence is thin. At a roadside check or a follow-up inspection, the evidence is what counts.

How a walkaround app records the check

The legal check stays the same. The app changes how it is recorded. Every completed check is timestamped, so there’s no argument about when it happened. Drivers attach photos of any defect, so the workshop can see the fault for itself. A reported defect goes directly into maintenance, and whoever fixes the vehicles hears about it as soon as the driver reports it. Every check, pass or fail, is stored in one audit trail that you can search in seconds and keep beyond the two-year minimum.

Paper vs app, side by side

What the RSA looks forPaper bookWalkaround app
Proof of when the check was doneHand-written date, easily disputedAutomatic timestamp on every check
Evidence of a defectDescription onlyDescription plus photos
Getting a defect to maintenanceManual. The workshop sees the book later, if at allRouted instantly to the workshop
Retrieving a record on demandSearch a drawer of padsSearch by vehicle and date in seconds
Two-year record retentionDepends on the book survivingStored digitally, retained automatically

What a good walkaround check captures

  • The Schedule 1 items, interior and exterior, including the tachograph
  • Who carried out the check, and that they’re trained and competent
  • A timestamp proving it was done before first use that day
  • For any defect: a description, the time and date found, and temporary measures taken
  • A clear dangerous-defect path that stops the vehicle until it’s repaired and certified
  • A complete, retrievable record kept for at least two years

Who can do a walkaround check? +

A trained, competent person. That can be the driver or a mechanic. Under S.I. 348/2013 the operator must ensure the person carrying out the check is competent to do so, covering the vehicle inside and out against the Schedule 1 items, including the tachograph.

How long should a walkaround check take? +

It varies by vehicle and operator, but it must be a genuine check of the Schedule 1 items inside and out, done before the vehicle is first used and no more than once in any 24-hour period. A guided app keeps it consistent, so items aren’t skipped under time pressure.

How long must I keep walkaround and defect records? +

At least two years. Maintenance and defect records must be retained for a minimum of two years under S.I. 348/2013. A digital record keeps them searchable and intact for that period and beyond.

What must a defect record contain? +

A description of the defect, the time and date it was found, and any temporary measures taken. Where the defect is dangerous, the vehicle must not be used until it has been repaired and certified as repaired.

Is a walkaround app legally acceptable? +

Yes. The law sets out what the check must cover and what the record must contain. It doesn’t set a format for keeping it. An app that captures the Schedule 1 items, the person who checked, a timestamp, defect details and temporary measures, and retains them for at least two years, satisfies those requirements and makes the evidence far easier to produce.

See it in action

Traxsit keeps the daily walkaround as an audit-ready digital record and sends defects directly to maintenance. Explore walkaround checks, see how it fits the wider fleet compliance picture, or book a demo.